US Tech Force

CRAFTSMEN APPRENTICE

by

CRAFTSMEN APPRENTICE – Appleton, WI

IF YOU ARE INTERESTED IN A GREAT TRAINING OPPORTUNITY THIS IS THE JOB FOR YOU! The Craftsmen Apprentice position is designed to give hands on experience with Manufacturing equipment in a support role. The goal is to support the primary machine operators by performing duties listed below to allow them time to focus on the programming and final stages of part set-up. Depending on aptitude, mechanical skill, and work habits; the trainee can transition into a full machine operator role as needed.

Responsibilities: Employee responsibilities include but are not limited to the following.

  1. Unload machines that have completed production.
  2. Bring production parts to quality or elsewhere as appropriate.
  3. Changeover feed tooling appropriate for wire size and string wire.
  4. Pull up program where applicable and set tooling based off of previous manufacturing notes where possible.
  5. Help monitor machines including where parts are running to allow primary operators time to focus on set-up.
  6. Identify tooling required for parts and put request through to have tooling made where appropriate.
  7. Perform preventive maintenance on machines and ovens as time permits.
  8. Employee may be asked to fill in elsewhere as necessary to meet customer shipment

Both 1st and 2nd shifts are available

For immediate consideration forward resume to: appl@ustfjobs.com

Apply in person at: US Tech Force, 4010 W. Spencer Street, Suite 101, Appleton, WI 54914

Apply on-line at www.ustechforce.com

Call for more information at: 920-832-1200

We are a full service employment agency…specializing in helping people find the right job at the right company. We service all industries – all positions & all levels.

 

 

General Labor-Fox Valley Area

by

U.S. TECH FORCE has several employment opportunities in the Fox Valley areas.

Machine operators /Laser Operators              Industrial Sewing Operators.
Painters- Industrial and Commercial.
Welders/Mechanical Assemblers/Utility Workers.     Commercial HVAC/Grain Dryer Operators.
Construction laborers, carpenters, concrete wall setters and roofer trainees,
Sandblasters, silk screeners and more!

Please visit each individual job posting for more details on pay, benefits, qualifications and shifts available at:  www.ustechforce.com

Mon- Fri  1st and 2nd shifts.

Sun-Thurs 3rd shift

Pay will depend upon the shift and position.

Qualifications:

Can work your scheduled shift. No attendance issues.

Lift to 50# on occasion.

Pre employment drug screen.

Reliable transportation to work.

U.S. Tech Force is a full service employment agency…specializing in helping people find the right jobs with the right company. We work with All Industries and All Positions and primarily offer temp to  hire , long term employment.

Visit us at : www.ustechforce.com for all our current job opportunities in the
Fond du Lac, Oshkosh, Fox Valley and Green Bay areas!
Offering great job opportunities for your future.

For Immediate Consideration –Resumes can be sent to app@ustfjobs.com – OR –
Apply in person at: US Tech Force, 4010 W. Spencer St. #101, Appleton, WI. 54914
OR – Apply on-line at: www.ustechforce.com

US Tech Force has been in business for over 20 years, serving Northeast Wisconsin’s small, medium and large businesses with their wide range of staffing needs.

 

Packager

by

We are seeking a 1st Shift Packaging employee to become an integral part of our team!

Responsibilities:

  • Stack garments coming off drier,
  • Box product
  • Count for accuracy
  • Attention to detail
  • Must be able to stand for their shift

Qualifications:

  • Ability to handle physical workload
  • Ability to multitask and prioritize
  • Ability to thrive in fast-paced environment
  • Strong organizational skills

For immediate consideration forward resume to: appl@ustfjobs.com

Apply in person and have an immediate interview at: US Tech Force, 4010 W. Spencer Street, Suite 101, Appleton, WI  54914

Apply on-line at www.ustechforce.com

We are a full service employment agency…specializing in helping people to find the right job at the right company. We service all industries – all positions & all levels. Call for more information 920-832-1200

Silk Screen Press Operator

by

Silk Screen Press Operator

A well established Company with over 20 years and growing is looking to hire a 1st shift Press Operator. This is an immediate opening within a fast paced work environment. 1st shift – 8:00 am – 5:00 pm

Ideal Candidate will have 1+ year operating printing press to include

  • Able to be efficiently set up multi-color jobs
  • Adjust press for print quality
  • Operate press for quality printing and also to meet production goals
  • Load product for proper print placement
  • Work independently with a mature team attitude

Education and/or Experience:

  • One plus years of experience and/or training in screen printing; or equivalent combination of education and experience is preferred.
  • Must be dependable, have good judgment of color, design and printing quality.

For immediate consideration forward resume to: appl@ustfjobs.com

Apply in person at: US Tech Force, 4010 W. Spencer Street, Suite 101, Appleton, WI 54914

Apply on-line at www.ustechforce.com

We are a full service employment agency…specializing in helping people find the right job at the right company. We service all industries – all positions & all levels.

Call for more information 920-832-1200

Blaster – 1st Shift & 2nd Shift

by

Blaster – Willing To Train

We are looking for a Blaster to work in a fast-paced industrial environment; blasting primarily large steel/metal materials. First Shift – Full-Time

Primary Responsibilities:

Operating Equipment – Grit blasting equipment such as hoses, nozzles and hoods. Various blast media such as metal grit and glass bead.

Blast Knowledge – Experience with various grades of blast quality. WILL TRAIN THE RIGHT CANDIDATE

Quality Control – Knowledge of the difference between blast grades is a plus, as well as knowledge of metal fabrications on what type of media should be used for different grades of metal.

Set-up and Clean-up – Responsible for functionality and maintenance of assigned equipment. Should know or will be trained on how to disassemble blast nozzles and clean thoroughly and at end of day and be able to prep for next day’s work swiftly. Set-up and shut-down must be completed expeditiously to maximize blast-time. Must also learn, understand and adhere to clean up guidelines.

Teamwork – Must maintain constant contact with supervisors and coworkers to assure safety, efficiency and open communication. Must be willing to shift priorities as needed to optimize efficiency.

Cross training – All employees are cross trained to perform other duties, such as, but not limited to: Painting, Material Handling, Quality Control, etc.

Meetings – Attend staff meetings at start of each shift with shift supervisors, shipping and receiving supervisor and quality control supervisor.

Time Management – Blasters are responsible for tracking time allocated to various jobs that occur simultaneously and submit accurate time card at the end of each day. Team Members are expected to cooperate and assist others as necessary to boost productivity.

Safety – Blasters are required to go through training and testing for required machinery and abide by procedures for operating equipment and for conduct on the shop floor.

Policies & Procedures – All team members are expected to have a basic understanding of Profile Finishing Systems employee handbook and know general protocol for conduct and performance expectations.

Knowledge, Skills and Abilities:

• Blasters are trained with in-depth knowledge of paint production warehouse and/or heavy industrial background.
• Industrial Blast Booth experience is not required, but is a plus. Attention to detail mandatory to avoid runs, skips and other quality issues.
• Basic knowledge of quality control practices are beneficial.
• Must possess high school diploma or equivalent.• Strong work ethic is a must. Unexcused absences and tardiness will not be tolerated.
• Excellent teamwork and communication skills are required.

• Fork Lift experience is a plus.

For immediate consideration: forward your resume to: appl@ustfjobs.com

OR – Apply in person at: US Tech Force, 4010 Spencer St, Suite 101, Appleton, WI 54914

OR – Visit our website for an up-to-date list of job openings or to apply: www.ustechforce.com

Call at: 920-832-1200

Assembler

by

Assembler for Chain Lifting Slings

Chain Wire Rope Department

  • Assembly of chain lifting slings (assembling parts)
  • Operating a bench mounted pneumatic chain cutter
  • Approximately 24 hours per week
  • Contract to hire

For immediate consideration forward resume to: appl@ustfjobs.com

Apply in person and have an immediate interview at: US Tech Force, 4010 W. Spencer Street, Suite 101, Appleton, WI 54914

Apply on-line at www.ustechforce.com

We are a full service employment agency…specializing in helping people to find the right job at the right company. We service all industries – all positions & all levels. Call for more information 920-832-1200

 

Blaster – 1st Shift & 2nd Shift

by

Blaster – Willing To Train

We are looking for a Blaster to work in a fast-paced industrial environment; blasting primarily large steel/metal materials. First Shift – Full-Time

Primary Responsibilities:

Operating Equipment – Grit blasting equipment such as hoses, nozzles and hoods. Various blast media such as metal grit and glass bead.

Blast Knowledge – Experience with various grades of blast quality. WILL TRAIN THE RIGHT CANDIDATE

Quality Control – Knowledge of the difference between blast grades is a plus, as well as knowledge of metal fabrications on what type of media should be used for different grades of metal.

Set-up and Clean-up – Responsible for functionality and maintenance of assigned equipment. Should know or will be trained on how to disassemble blast nozzles and clean thoroughly and at end of day and be able to prep for next day’s work swiftly. Set-up and shut-down must be completed expeditiously to maximize blast-time. Must also learn, understand and adhere to clean up guidelines.

Teamwork – Must maintain constant contact with supervisors and coworkers to assure safety, efficiency and open communication. Must be willing to shift priorities as needed to optimize efficiency.

Cross training – All employees are cross trained to perform other duties, such as, but not limited to: Painting, Material Handling, Quality Control, etc.

Meetings – Attend staff meetings at start of each shift with shift supervisors, shipping and receiving supervisor and quality control supervisor.

Time Management – Blasters are responsible for tracking time allocated to various jobs that occur simultaneously and submit accurate time card at the end of each day. Team Members are expected to cooperate and assist others as necessary to boost productivity.

Safety – Blasters are required to go through training and testing for required machinery and abide by procedures for operating equipment and for conduct on the shop floor.

Policies & Procedures – All team members are expected to have a basic understanding of Profile Finishing Systems employee handbook and know general protocol for conduct and performance expectations.

Knowledge, Skills and Abilities:

• Blasters are trained with in-depth knowledge of paint production warehouse and/or heavy industrial background.
• Industrial Blast Booth experience is not required, but is a plus. Attention to detail mandatory to avoid runs, skips and other quality issues.
• Basic knowledge of quality control practices are beneficial.
• Must possess high school diploma or equivalent.• Strong work ethic is a must. Unexcused absences and tardiness will not be tolerated.
• Excellent teamwork and communication skills are required.

• Fork Lift experience is a plus.

For immediate consideration: forward your resume to: appl@ustfjobs.com

OR – Apply in person at: US Tech Force, 4010 Spencer St, Suite 101, Appleton, WI 54914

OR – Visit our website for an up-to-date list of job openings or to apply: www.ustechforce.com

Call at: 920-832-1200

 

 

Blaster – 1st Shift & 2nd Shift

by

Blaster – Willing To Train

We are looking for a Blaster to work in a fast-paced industrial environment; blasting primarily large steel/metal materials. First Shift – Full-Time

Primary Responsibilities:

Operating Equipment – Grit blasting equipment such as hoses, nozzles and hoods. Various blast media such as metal grit and glass bead.

Blast Knowledge – Experience with various grades of blast quality. WILL TRAIN THE RIGHT CANDIDATE

Quality Control – Knowledge of the difference between blast grades is a plus, as well as knowledge of metal fabrications on what type of media should be used for different grades of metal.

Set-up and Clean-up – Responsible for functionality and maintenance of assigned equipment. Should know or will be trained on how to disassemble blast nozzles and clean thoroughly and at end of day and be able to prep for next day’s work swiftly. Set-up and shut-down must be completed expeditiously to maximize blast-time. Must also learn, understand and adhere to clean up guidelines.

Teamwork – Must maintain constant contact with supervisors and coworkers to assure safety, efficiency and open communication. Must be willing to shift priorities as needed to optimize efficiency.

Cross training – All employees are cross trained to perform other duties, such as, but not limited to: Painting, Material Handling, Quality Control, etc.

Meetings – Attend staff meetings at start of each shift with shift supervisors, shipping and receiving supervisor and quality control supervisor.

Time Management – Blasters are responsible for tracking time allocated to various jobs that occur simultaneously and submit accurate time card at the end of each day. Team Members are expected to cooperate and assist others as necessary to boost productivity.

Safety – Blasters are required to go through training and testing for required machinery and abide by procedures for operating equipment and for conduct on the shop floor.

Policies & Procedures – All team members are expected to have a basic understanding of Profile Finishing Systems employee handbook and know general protocol for conduct and performance expectations.

Knowledge, Skills and Abilities:

• Blasters are trained with in-depth knowledge of paint production warehouse and/or heavy industrial background.
• Industrial Blast Booth experience is not required, but is a plus. Attention to detail mandatory to avoid runs, skips and other quality issues.
• Basic knowledge of quality control practices are beneficial.
• Must possess high school diploma or equivalent.• Strong work ethic is a must. Unexcused absences and tardiness will not be tolerated.
• Excellent teamwork and communication skills are required.

• Fork Lift experience is a plus.

For immediate consideration: forward your resume to: appl@ustfjobs.com

OR – Apply in person at: US Tech Force, 4010 Spencer St, Suite 101, Appleton, WI 54914

OR – Visit our website for an up-to-date list of job openings or to apply: www.ustechforce.com

Call at: 920-832-1200

Industrial Painter – 2nd Shift

by

Industrial Painter

Job Title: Painter –  2nd Shift

Position Summary:

Must be able to take direction and work in a fast-paced industrial environment; priming, painting/coating primarily large steel/metal materials.

Operating Equipment – Both conventional and airless methods used for epoxy, urethane and polyurethane paints. (Powder coating and automotive painting not necessarily transferable.)

Paint Knowledge – Experience with mixing paint as well as an understanding of its constituents and characteristics for ease in applying is a plus. As well as knowledge of anticipated drying times and correcting of flaws when necessary. (Willing to Train)

Knowledge, Skills and Abilities:

  • Prefer knowledge of paint production warehouse and/or heavy industrial background.
  • Conventional and airless painting experience are a plus. Attention to detail is mandatory to avoid runs, skips and other quality issues.
  • Must also be conscientious of safety and clean-up.
  • Basic knowledge of quality control practices and experience with wet mil gauges is beneficial.
  • Strong work ethic is a must. Unexcused absences and tardiness will not be tolerated.
  • Excellent teamwork and communication skills required.

Working Conditions:

• Must be able to lift at least 25 pounds.
• Some jobs require working at heights that exceed 20 feet (after 90-day probationary period).
• May experience significant changes in room temperatures in severely hot or cold weather.
• Safety glasses/goggles, ear plugs, and steel toe boots must be worn at all times on shop floor.
• Must have pulmonary fit test along with hearing tests performed annually.

For Immediate Consideration –Resumes can be sent to appl@ustfjobs.com – OR –

Apply in person at: US Tech Force, 4010 W. Spencer St. Suite 101, Appleton, WI 54914

OR – Apply on-line at: www.ustechforce.com

Like us on Facebook: www.facebook.com/ustechforce

US Tech Force is a full service employment agency…specializing in helping people find the right jobs with the right company. We work with All Industries and All Positions and primarily offer temp to hire , long term employment.

 

CDL Instructor

by

Entry Level CDL Instructor

Job Summary and Purpose:

To coordinate all activities pertaining to knowledge and skills development of students enrolled in CDL School.

Job Duties:

  • To coordinate all Yard and Road activities of students assigned to you
  • Conduct training of students assigned to you.
  • Perform minor repairs and adjustments on School equipment.
  • Inform lead instructor of any school equipment that needs maintenance beyond minor adjustments.
  • Be a point of contact for any student problems.
  • Inform the lead instructor of any concerns, complaints, or problems with students.
  • Maintain statistical systems for assessing student’s progress.
  • Maintain all records required by WEAB and WI-DOT pertaining to school licensing.
  • Maintain and help lead instructor update curriculum
  • Prepare reports for management review concerning student training.

Eligibility Requirements – Would prefer at least 3 years of CDL Driving Experience.

  • General Knowledge of transportation systems.
  • Ability to communicate with others for a common goal.
  • Ability to read, write and perform simple mathematical calculations.
  • General knowledge of the state of Wisconsin requirements for truck driver training institutions.
  • General knowledge of curriculum development.
  • Knowledge of technical systems used for classroom instruction.
  • Must be able to pass D.O.T. Testing for State certified licensed instructor.
  • Must have current CDL and be able to pass physical requirements.
  • Be able to work a couple of Saturdays when necessary and willing to work late if a student needs extra help.

Work Environment:

  • The entry level instructor may spend from 50 to 75% of time out-of-doors, exposed to potentially difficult environmental conditions.
  • The entry level instructor may spend from 25 to 50% of time within the training department building in either a classroom environment or performing administrative duties.

For immediate consideration forward resume to: appl@ustfjobs.com

Apply in person and have an immediate interview at: US Tech Force, 4010 W. Spencer Street, Suite 101, Appleton, WI 54914

Apply on-line at www.ustechforce.com

We are a full service employment agency…specializing in helping people to find the right job at the right company. We service all industries – all positions & all levels. Call for more information 920-832-1200